3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head | Gray

Overview

This gray 3 Legged Thing Tripod Kit includes a gray Leo 2.0 Tripod and gray AirHed Pro Lever Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" in height. Tripod heads such as the AirHed Pro Lever Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Leo 2.0 Tripod. When combined and configured as a tripod, the Leo 2.0 Tripod and AirHed Pro Lever Ball Head supports up to 66.0 lb and measures 14.7" when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Leo 2.0 Tripod and AirHed Pro Lever Ball Head can be set at a minimum height of 8.2" when the tripod's 2-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 44.1" or 57.7" with the center column fully raised along with the ball head. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Leo 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport. The AirHed Pro Lever Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.

Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.


Key Features
  • Load Capacity: 66.0 lb
  • Max Height: 57.7", Min Height: 8.2"
  • Folded Length: 14.7"
  • Leg Sections: 5, Weight: 4.1 lb
  • Carbon Fiber Legs, Bubble Level
  • Twist Locks, Rubber Feet
  • 3-Position Leg Angle Locks
  • Reversible, Multi-Section Rapid Column
  • Monopod-Convertible Legs and Column
  • AirHed Pro Lever Ball Head, Arca-Type
In the Box
  • 3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head (Gray)
  • 3 Legged Thing Leo 2.0 Tripod (Gray)
  • 3 Legged Thing AirHed Pro Lever Ball Head (Gray)
  • Microfiber Bag