






Benro MoveOver8B Carbon Fiber Slider with Case | 35.4"
Benro MoveOver8B Carbon Fiber Slider with Case | 35.4"
STORE
54 Orchard Street
Ground Floor
New York NY 10002
United States
The Benro MoveOver8B Carbon Fiber Slider, accompanied by a protective case, features an aluminum slider carriage that operates on carbon fiber rails, providing 35.4 inches of effective carriage travel. The carriage is designed with a flat mounting surface equipped with a 3/8"-16 threaded mounting stud, suitable for attaching a flat base fluid head. Additionally, it incorporates pre-tensioned roller bearings to ensure a seamless glide. A friction brake, adjustable via a single knob, allows for fine-tuning of the slider's resistance or can be utilized as a brake when the slider is positioned horizontally.
The slider is equipped with carbon fiber rails measuring 18mm in diameter and can accommodate a maximum load of 17.6 pounds. It can be affixed to a tripod or stands, or positioned on a flat surface. A built-in bubble level allows for easy verification of the slider's levelness. Each leg attaches to the ends of the slider track through a rosette and is capable of rotating 360°. Additionally, each foot offers approximately 4 inches of height adjustment to ensure proper leveling. The slider can be operated at any angle between 0 and 90°, and it is also possible to undersling the slider.
- The adjustable legs can be moved throughout 360° of rotation. However, they are at their most supportive between 12 and 60°.
- The track ends allow you to mount the slider on stands using the Baby pin slot. Each track end features 1/4"-20 and 3/8"-16 threaded mounting holes.
- The slider can also be mounted directly onto a tripod using the 3/8"-16 or 1/4"-20 threaded mounting hole on the attached cheese plate.
- The carriage has four 1/4"-20 threaded mounting holes for accessories.
Camera Slider |
|
---|---|
Sliding System | Roller Bearing Sliding System |
Load Capacity | 17 lb / 7.71 kg |
Built-In Stand/Feet | Adjustable: 0 to 3.94" / 0 to 100 mm |
Travel Distance | 35.4" / 0.9 m |
Curved | No |
Bubble Level | Yes |
Mounting |
|
---|---|
Head Mount Type | 3/8"-16 Male |
Tripod Leg / Stand Mounting | 2x 3/8"-16 Female Thread 1x 1/4"-20 Female Thread 2x 5/8" Receiver |
Accessory Mounting | 4x 1/4"-20 Female (Carriage) 3x 1/4"-20 Female (Rails) 1x 3/8"-16 Female (Rails) |
Physical |
|
---|---|
Dimensions | W: 3.94" / W: 10 cm |
Material | Aluminum Body with Carbon Fiber Rail |
Weight | 3.64 lb / 1.65 kg (Including Legs, Knobs) |






